Filter
Top Products
3-27
E
3) Push the tilt support knob into the clamp
bracket to support the engine.
WARNING
@
After tilting the engine, be sure to sup-
port it with the tilt support knob. Other-
wise, the engine could fall back down
suddenly if oil in the power tilt unit
should lose pressure.
@
EMU01313
PROCEDURE FOR TILTING DOWN
Power tilt model
1) Push the power tilt switch “UP” until the
engine is supported by the tilt rod.
2) Pull out the tilt support knob.
3) Push the power tilt switch “DN” (Down)
to lower the engine to the desired posi-
tion.
U68T13.book Page 27 Wednesday, August 8, 2001 12:37 PM