Filter
Top Products
4-20
E
F1025E
t
F1043
r
e
w
q
t
w
EMU01330
REPLACING FUSE
If a fuse has blown, remove the electrical
cover, open the fuse holder and remove
the fuse with a fuse puller. Replace it with
a spare one of proper amperage.
w
Be sure to use the specified fuse. An
incorrect fuse or a piece of wire may
allow excessive current flow. This could
cause electrical system damage and a fire
hazard.
NOTE:
If the new fuse blows again immediately,
consult a Yamaha dealer.
1 Electrical cover
2 Fuse holder
3 Fuse (30A × 1, 20A × 1)
4 Spare fuse (30A, 20A)
5 Fuse puller
67F-9-16-4 11/3/02 1:50 PM Page 21