Filter
Top Products
Operation
37
4. Push the tilt support knob into the clamp
bracket or pull the tilt support lever to-
ward you to support the engine.
WARNING
EWM00260
After tilting the outboard motor, be sure
to support it with the tilt support knob or
tilt support lever. Otherwise the outboard
motor could fall back down suddenly if oil
in the power trim and tilt unit loses pres-
sure.
5. Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch / power tilt switch “”
(down) to retract the trim rods.
CAUTION:
ECM00250
Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
from marine growth and corrosion which
could damage the power trim and tilt
mechanism.
EMU28054
Procedure for tilting down
Power trim and tilt models / power tilt models
1. Push the power trim and tilt switch / pow-
er tilt switch “” (up) until the outboard
motor is supported by the tilt rod and the
tilt support lever / tilt support knob be-
comes free.
2. Release the tilt support lever or pull out
the tilt support knob.
UP
ZMU03523
ZMU03449
ZMU03997