Filter
Top Products
4-7
E
EMK26110*
Lubrication
1) Remove the spark plugs, and spray a 10
second spray of Yamaha Stor-Rite
Engine Fogging Oil into each cylinder.
Grease the spark plug threads and rein-
stall the spark plugs and torque to prop-
er specification.
(Refer to the Periodic Cleaning and
Inspection section, “Cleanning and
adjusting spark plug.”).
2) Turn the engine over with the stop lan-
yard disconnected to work the fogging
oil into the piston rings.
3) Fill the oil tanks. This prevents the for-
mation of condensation. For models with
a remote tank, it may be necessary to
manually override the control unit to
completely fill the engine main tank.
(Refer to the Troubleshooting section,
“Temporary action in emergency.”).
4) Change the lower unit oil. (Refer to the
Periodic Cleaning and Inpsection sec-
tion, “Changing gear oil.”). Inspect the
oil for the presence of water which indi-
cates a leaky seal. Seal replacement
should be performed by an authorized
Yamaha dealership prior to use.
5) Grease all grease fittings. (Refer to the
Periodic Cleaning and Inspection sec-
tion, “Greasing.”)
EMK27010*
Cleaning and Anti-corrosion Measure
1) Wash down the exterior of the outboard
with fresh water and dry off completely.
2) Spray the engine’s exterior with Yamaha
Silicone Protectant (Part No. LUB-SILC-
NE-13-00).
3) Wax the cowling with a non-abrasive
wax such as Yamaha Silicone Wax
(Part No. ACC-11000-15-02).
64C-9-16-4 4/18/01 11:41 AM Page 76