Filter
Top Products
Specifications and requirements
18
fectiveness. Consult your Yamaha dealer
concerning what may work best for the locally
available gasoline and environmental condi-
tions.
EMU41350
Anti-fouling paint
A clean hull is required to maintain your boat’s
performance. Boats moored in the water
should be protected from marine growth (bar-
nacles, mussels, and marine plants). If ap-
proved by regulations for your area, the
bottom of the hull can be coated with an anti-
fouling paint to inhibit marine growth.
Anti-fouling paints specifically formulated for
use on aluminum may be applied to the out-
board motor. The original Yamaha paint sur-
face may be scuffed lightly before applying
anti-fouling paint, but do not remove the origi-
nal paint. Removal of the original paint will in-
crease the rate of corrosion.
NOTICE
ECM02410
Anti-fouling paint for fiberglass and wood
may contain materials, such as copper,
graphite, and tin, that can cause corrosion
if applied to aluminum boats and outboard
motor components. Never apply these
types of paint to your outboard motor be-
cause rapid corrosion damage could oc-
cur.
Sacrificial anodes are attached to the out-
board motor to provide corrosion protection
and must never be painted.
NOTICE
ECM02420
Painted sacrificial anodes will not provide
corrosion protection.
EMU40301
Outboard motor disposal re-
quirements
Never illegally discard (dump) the outboard
motor. Yamaha recommends consulting the
dealer about discarding the outboard motor.
EMU36352
Emergency equipment
Keep the following items onboard in case
there is trouble with the outboard motor.
● A tool kit with assorted screwdrivers, pliers,
wrenches (including metric sizes), and
electrical tape.
● Waterproof flashlight with extra batteries.
● An extra engine shut-off cord (lanyard) with
clip.
● Spare parts, such as an extra set of spark
plugs.
Consult your Yamaha dealer for details.
EMU25221
Emission control information
EMU25230
North American models
This engine conforms to U.S. Environmental
Protection Agency (EPA) regulations for ma-
rine SI engines. See the label affixed to your
engine for details.
EMU31560
Approval label of emission control certifi-
cate
This label is attached to the bottom cowling.
New Technology; (4-stroke) MFI
1. Approval label location
1
ZMU06892
U6CB10E0.book Page 18 Wednesday, September 30, 2009 9:49 AM