Yamaha VF200 Outboard Motor User Manual


 
Components
28
tilts the outboard motor down and trims it
down. When the switch is released, the out-
board motor will stop in its current position.
For instructions on using the power trim and
tilt switch, see page 61.
WARNING
EWM01031
Use the power trim and tilt switch located
on the bottom cowling only when the boat
is at a complete stop with the engine off.
Attempting to use this switch while the
boat is moving could increase the risk of
falling overboard and could distract the
operator, increasing the risk of collision
with another boat or an obstacle.
EMU40760
Cowling lock lever
The cowling lock levers are used to secure
the top cowling.
EMU40802
Flushing device
The flushing device is used to clean the cool-
ing water passages of the outboard motor us-
ing a garden hose and tap water. For
instructions on using the flushing device, see
page 66.
EMU40822
Fuel filter
The fuel filter functions to remove foreign ma-
terial and separate water from the fuel. If wa-
ter separated from the fuel exceeds a specific
volume, the alert system will activate. For fur-
ther information, see page 44.
1. Power trim and tilt switch
1. Cowling lock lever
1
UP
DN
ZMU06907
1
ZMU06909
1. Cowling lock lever
1. Flushing device
1
ZMU06910
1
ZMU06911
U6CB10E0.book Page 28 Wednesday, September 30, 2009 9:49 AM