Yamaha VF200 Outboard Motor User Manual


 
Instruments and indicators
38
EMU36110
Start-up checks
Place the remote control lever in neutral and
turn the main switch to “” (on). After all the
displays come on and the total hour display
comes on, the gauge will change to normal
operation. If the buzzer sounds and the water
separator-alert indicator blinks, consult your
Yamaha dealer immediately.
T
IP:
To stop the buzzer, press the “” (set) or
“” (mode) button.
EMU36130
Low oil pressure-alert
If the engine oil pressure drops too low, the
low oil pressure-alert indicator will start to
blink, and the engine speed will automatically
decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the low oil pressure-alert indicator
blinks. Check the engine oil quantity and re-
plenish oil if necessary. If the alert device has
activated while the appropriate engine oil
quantity is maintained, consult your Yamaha
dealer.
NOTICE
ECM01601
Do not continue to run the engine if the
low oil pressure alert device has activated.
Serious engine damage will occur.
1. Set button
2. Mode button
1. Tachometer
2. Trim meter
3. Multifunction display
4. Water detection-alert indicator
5. Engine trouble alert/maintenance indicator
6. Cooling water pressure
7. Oil pressure (4-stroke models)
8. Cooling water/engine temperature
9. Battery voltage
2
1
ZMU05417
1452
3
6879
ZMU05418
ZMU05430
ZMU05431
U6CB10E0.book Page 38 Wednesday, September 30, 2009 9:49 AM