Filter
Top Products
Operation
51
EMU40411
Outboard motor
● Check that the outboard motor is mounted
properly and check the outboard motor
mounting bolts for looseness.
● Check the propeller for damage.
● Check for engine oil leaks.
EMU36491
Flushing device
Check that the flushing device’s garden hose
connector is securely screwed on to the fitting
on the bottom cowling. NOTICE: If the gar-
den hose connector is not properly con-
nected, cooling water can leak out and the
engine can overheat during operation.
[ECM01801]
EMU40751
Installing top cowling
1. Check the rubber seal for damage. If the
rubber seal is damaged, have it replaced
by a Yamaha dealer.
2. Check that the rubber seal is seated all
the way around the bottom cowling.
3. Check that all of the cowling lock levers
are pulled outward.
4. Align the 3 protrusions on the top cowling
with the corresponding holders on the
bottom cowling, and then place the top
cowling on the bottom cowling.
1. Flushing device
2. Garden hose connector
3. Fitting
123
ZMU06919
1. Rubber seal
2. Bottom cowling
1. Top cowling
2. Protrusion
3. Holder
4. Bottom cowling
2
1
ZMU06978
2
3
4
1
ZMU07015
U6CB10E0.book Page 51 Wednesday, September 30, 2009 9:49 AM