Yamaha VF250 Outboard Motor User Manual


 
Specifications and requirements
13
EMU40500
Specifications
T
IP:
(SUS) indicates that the specification is for
the outboard motor when it is equipped with a
stainless steel propeller.
EMU2821J
Dimension:
Overall length:
959 mm (37.8 in)
Overall width:
664 mm (26.1 in)
Overall height L:
1749 mm (68.9 in)
Transom height L:
493 mm (19.4 in)
Weight (SUS) L:
234.0 kg (516 lb)
Performance:
Full throttle operating range:
50006000 r/min
Maximum output:
VF200A 147.0 kW@6000 r/min (200
HP@6000 r/min)
VF225A 165.0 kW@6000 r/min (225
HP@6000 r/min)
VF250A 184.0 kW@6000 r/min (250
HP@6000 r/min)
Idle speed (in neutral):
750 ±50 r/min
Engine:
Type:
4-stroke V
Displacement:
4169.0 cm³
Bore × stroke:
96.0 × 96.0 mm (3.78 × 3.78 in)
Ignition system:
TCI
Spark plug (NGK):
LFR6A-11
Spark plug gap:
1.01.1 mm (0.0390.043 in)
Control system:
Remote control
Starting system:
Electric starter
Starting carburetion system:
Electronic fuel injection
Valve clearance (cold engine) IN:
0.170.24 mm (0.00670.0094 in)
Valve clearance (cold engine) EX:
0.310.38 mm (0.01220.0150 in)
Min. cold cranking amps (CCA/SAE):
700.0 A
Min. marine cranking amps (MCA/ABYC):
900.0 A
Min. reserve capacity (RC/SAE):
220 minutes
Maximum generator output:
49 A
Drive unit:
Gear positions:
Forward-neutral-reverse
Gear ratio:
1.75(21/12)
Trim and tilt system:
Power trim and tilt
Propeller mark:
T
Fuel and oil:
Recommended fuel:
VF200A Regular unleaded gasoline
VF225A Premium unleaded gasoline
VF250A Premium unleaded gasoline
Min. pump octane:
VF200A 87
VF225A 89
VF250A 89
Recommended engine oil:
YAMALUBE 4-M FC-W or 4-stroke
outboard motor oil
U6CB10E0.book Page 13 Wednesday, September 30, 2009 9:49 AM