Yamaha VF250 Outboard Motor User Manual


 
Components
24
EMU40610
Remote control box
The remote control box is equipped with the
remote control lever and electrical switches.
EMU26190
Remote control lever
Moving the lever forward from the neutral po-
sition engages forward gear. Pulling the lever
back from neutral engages reverse. The en-
gine will continue to run at idle until the lever
is moved about 35° (a detent can be felt).
Moving the lever farther opens the throttle,
and the engine will begin to accelerate.
EMU40630
Neutral interlock trigger
The neutral interlock prevents the remote
control lever from accidentally being moved
forward or rearward from the neutral position.
To move the remote control lever forward or
rearward from the neutral position, pull the
neutral interlock trigger up, and then move the
remote control lever.
1. Power trim and tilt switch
2. Remote control lever
3. Free accelerator button
4. Engine shut-off switch
5. Throttle friction adjuster
6. Neutral interlock trigger
1. Power trim and tilt switch
2. Remote control lever
3. Free accelerator button
4. Throttle friction adjuster
ZMU07022
1
2
3
5
4
6
2
1
3
4
ZMU04572
1. Neutral “”
2. Forward “”
3. Reverse “”
4. Fully closed
5. Throttle
6. Fully open
1. Neutral “”
2. Forward “”
3. Reverse “”
4. Fully closed
5. Throttle
6. Fully open
ZMU07024
N
1
F
6
5
2
R
3
35˚
35˚
5
4
6
4
ZMU06901
N
1
F
6
5
2
R
3
35˚
35˚
5
4
6
4
U6CB10E0.book Page 24 Wednesday, September 30, 2009 9:49 AM