Yamaha VF250 Outboard Motor User Manual


 
Instruments and indicators
39
EMU36221
Overheat alert
If the engine temperature rises too high while
cruising, the overheat-alert indicator will start
to blink. The engine speed will automatically
decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the overheat alert device has ac-
tivated. Check the cooling water inlet for clog-
ging.
NOTICE
ECM01592
Do not continue to run the engine if the
overheat-alert indicator blinks. Serious
engine damage will occur.
Do not continue to operate the engine if
a alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
EMU36150
Water separator alert
This indicator will blink if water has accumulat-
ed in the water separator (fuel filter) while
cruising. In such an event, stop the engine im-
mediately and see page 85 of this manual to
drain the water from the fuel filter. Get back to
the port soon and consult a Yamaha dealer
immediately.
NOTICE
ECM00910
Gasoline mixed with water could cause
damage to the engine.
EMU36160
Engine trouble alert
This indicator will blink if the engine malfunc-
tions while cruising. Get back to the port soon
and consult a Yamaha dealer immediately.
ZMU05421
ZMU05422
ZMU05423
ZMU05424
U6CB10E0.book Page 39 Wednesday, September 30, 2009 9:49 AM