Yamaha VF250 Outboard Motor User Manual


 
Operation
52
5. Push the cowling lock levers inward to
secure the top cowling.
6. Check the fitting of the top cowling by
pushing it with both hands. NOTICE: If
the top cowling is not installed cor-
rectly, water can enter the top cowling
and damage the engine, or the top
cowling can blow off at high speeds.
[ECM02370]
EMU40583
Checking power trim and tilt unit
WARNING
EWM02523
Never get under the lower unit while it is
tilted, even when the tilt support shaft is
installed. Severe injury could occur if
the outboard motor accidentally falls.
Body parts can be crushed between the
outboard motor and the clamp bracket
when the outboard motor is trimmed or
tilted.
Make sure that no one is near the out-
board motor before performing this
check.
1. Check the power trim and tilt unit for fluid
leakage.
1. Top cowling
2. Protrusion
3. Holder
4. Bottom cowling
1. Cowling lock lever
1. Cowling lock lever
2
1
4
3
2 3
ZMU07016
1
ZMU06920
1
ZMU06921
ZMU06922
ZMU06969
U6CB10E0.book Page 52 Wednesday, September 30, 2009 9:49 AM