Yamaha VZ150Z Outboard Motor User Manual


 
2-9
E
802016*
TRIP TIME BATT
Km/h
knot
mph
km
mile
SPEED
YAMAHA
set
mode
q
w
e
r
1
2
3
4
5
x100
r/min
TACH
1
2
3
4
5
x100
r/min
TACH
q
802014
1
2
3
4
5
x100
r/min
TACH
1
2
3
4
5
x100
r/min
TACH
q
802013
EMU00138
Oil-Level Indicator
This indicator shows the engine oil level.
If the oil level falls below the lower limit,
the warning indicator will start to blink.
Refer to the sections “FILLING OIL” and
“OIL LEVEL WARNING” for details.
1 Oil-level indicator
cC
Do not operate the engine without oil.
Serious engine damage will occur.
EMU00140
DIGITAL SPEEDOMETER
This meter contains the speedometer, fuel
meter with warning, trip meter, clock and
voltmeter with warning.
1 Speedometer
2 Fuel meter
3 Trip meter/clock/voltmeter
4 Warning indicator
NOTE:
After the main switch is first turned on, all
portions of the meter come on as a check.
After a few seconds, the meters will
change to normal operation. Watch the
meter when turning on the main switch to
make sure all segments come on.
EMU01553
Overheat Warning Indicator
If the engine temperature rises too high,
the warning indicator will start to blink.
Refer to “OVERHEAT WARNING” for
details.
1 Overheat warning indicator
cC
Do not continue to operate the engine if a
warning device has activated. If neces-
sary, refer to the “TROUBLESHOOTING”
section in this manual. Consult your deal-
er if the problem cannot be located and
corrected.
68J-9-12-2 3/26/01 4:15 PM Page 10