Filter
Top Products
4-23
E
5) With the outboard motor in a vertical
position, and using a flexible or pres-
surized filling device, inject the gear
oil into the oil drain plug hole.
6) When the oil begins to flow out of the
oil level plug hole, insert and tighten
the oil level plug.
7) Insert and tighten the oil drain plug.
603024
405022
Gear oil grade/capacity:
Refer to “SPECIFICATIONS,” page 4-1.
EMU01462
INSPECTING AND REPLACING
ANODE(S)
Yamaha outboard motors are protected
from corrosion by sacrificial anodes.
Check the anodes periodically. Remove
scales from the surfaces of the anodes.
For inspection and replacement of
anodes, consult a Yamaha dealer.
cC
Do not paint anodes, as this would ren-
der them ineffective.
601033
68J-9-12-4 3/26/01 4:16 PM Page 24