A SERVICE OF

logo

Starting Out with Your OmniBook
Setting Up the OmniBook
1-10
To replace the mouse
1. Tug sharply on the mouse to remove it and its arm from the computer.
2. Slip the arm of the new mouse into the slot inside the mousehole on the
computer. Push the arm in and force it past the first resistance.
To connect the floppy-disk drive
1. Use the floppy-drive cable (included with the OmniBook) to connect the
OmniBook and the floppy-disk drive.
Plug the larger plug (pinching its tabs) into the back of the floppy drive.
Plug the smaller plug into the floppy-drive port at the back of the
OmniBook.
Hint
When possible, plug in the OmniBook ac adapter while you’re using the floppy
drive. This prevents the battery from running down.