Filter
Top Products
#2801 Versi Bracket
Instruction Sheet
Assemble the appropriate mounting plate to the front of the
bracket upright with the black knurled adjustment lock knob.
Two mounts are supplied. One for mounting a Polycabonate
4-pole Speed Ring (with a thumb screw) and one for mounting
the OctaPlus 8-pole Speed Ring (using the two supplied Phillips
screws).
Mount the Accessory Shoe to the Versi Bracket with thumb
screws. Multiple mounting holes on the bracket base allow po-
sitioning your ash at the correct distance from the Speed Ring.
Use the extra thumb screw under the accessory shoe to add 1/2”
to raise ash position, if needed.
Attach your ash unit onto the Accessory Shoe and adjust the
ash height to center the reector in the Speed Ring opening.
The bracket off set allows the use of Pocket Wizard’s Flex TT5
while centering the ash. You are now ready to attach your
Lightbank to the Speed Ring.
Options:
You can use the #2688 Slave Adapter (optional) to mount •
other radio receivers.
The thumb screw has a threaded bottom hole to accept op-•
tional 1/4-20 stand adapter studs for placing on a light stand.
Ideally suited for the Mini and Maxi, as well as the Octa 2 •
Beauty Dish.
See the Video Library at www.chimeralighting.com/video-•
library for more information.
CHIMERA 1812 Valtec Lane, Boulder, CO 80301
303-444-8000 FAX 303-444-8303 888-444-1812
salesinfo@chimeralighting.com www.chimeralighting.com
Includes:
Versi Bracket with off set base•
Accessory Shoe •
3 - Threaded thumb screws•
Mount for Polycarbonate •
Speed Ring
Mount for Octa Speed Ring & •
2- screws
4-pole Poly
mount
On-Camera Flash Bracket for Your Polycarbonate
and Octa PLUS Speed Rings
8-pole Octa
mount
Height Adjustment
Lock Knob
Pocket Wizard
Flex TT5
Octa PLUS
Set Up
PN 28019800
#2688