Ingersoll-Rand 650923-X-B Heat Pump User Manual


  Open as PDF
of 2
 
OPERATOR’S MANUAL 650923 -- X--B
R EL EA S ED : 8 -- 3 0 -- 9 6
REVISED: 6--4--10
(REV
. 02)
FOUR BALL PUMP SERIES
2.062 SQ.” HYDRAULIC MOTOR
0.3:1 RATIO
6” STROKE
INCLUDE MANUALS:6695X--X LOWERPUMP END(PN 97999--002) &
FORM 3638--2 GENERAL INFORMATION MANUAL (PN 97999--353)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, T ROUBLESHOOTING
650923--X--B
CARBON STEEL
SERVICE KITS
• Use only genuine AROR replacement parts to assure compatible
pressure rating and longest service life.
• 637164 for repair of Hydraulic Motor section.
Service Note: The Hydraulic Motor Service/Parts Manual is not
shipped withthe pumpbutit isincluded witheach ServiceKit. Ifthis
Service/Parts Information is needed, request the Hydraulic Motor
Operator’s Manual from ARO. (Manual 61588--100,
PN 97999--063).
• 637230-X43 for repair of Lower Pump section.
Refer to the chart on page 2 for description of --XXX options.
SPECIFICATIONS
Model Series (Refertooption chart) 650923--X43--B..
Type Hydraulically Operated, Four Ball....................
Ratio 0.3:1....................
Hydraulic Motor 61588--100............
Motor Repair Kit 637164..........
Motor Size 2.062 sq.’’ (13.3 sq. cm)..............
Stroke 6’’..................
Hydraulic Inlet 3/8’’ -- 18 NPTF--1(f)...........
Hydraulic Return 1/2” -- 14 NPTF--1(f).........
Lower Pump End Series 66953--X43.....
Lower Pump Repair Kit 637230--X43.....
Material Inlet N/A.............
Material Outlet 3/4’’ NPTF--1 (f)...........
PERFORMANCE
Hydraulic Inlet Pressure Range 50 -- 1200 PSI (3.4 -- 83 bar)
Fluid Pressure Range 15 -- 373 PSI (1 -- 25.7 bar).......
Max. Rec’d Cycles / Minute 50...
Displacement In
3
Per Cycle 82.172...
Volume / Cycle 45.5 oz. (1346 ml).............
Cycles Per Gallon 2.8..........
Flow @ 50 Cycles / Minute 17.8 GPM (67 lpm)....
Noise Level N/A...............
PUMP DATA
Hydraulic Motor
61588--100
(SeeManual61588--100)
FIGURE 1
Material Outlet
3/4’’ NPTF--1(f)
195_FROMHYDRAULICINLET
Lower Pump
66953--X43
(SeeManual6695X--X)
Hydraulic Inlet
3/8--18 NPTF--1(f)
(NotShown)
Spacer Section
42-5/32
(1071 mm)
26-7/8
(683 mm)
14-21/32
(372 mm)
Accessory Available: 61937-- 1 Wall Bracket and66547 Floor Mounting Flange.
SPACER ROD 93348--1
CONNECTOR(See Figure 2)
MODEL 650923-X43-B
SCREW 93342--1 (3)
WASHERY14--625--C (3)
SPACER ROD 93348--2(2)
IMPORTANT
This is one of the four documents which support the pump.
Replacement copies of these forms are available upon request.
= 650923--X--B MODEL OPERATOR’S MANUAL
- GENERAL INFORMATION -- INDUSTRIAL PISTON PUMPS
- 6695X--X LOWER PUMP END OPERATOR’S MANUAL
- 61588--100 HYDRAULIC MOTOR OPERATOR’S MANUAL
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2010
www.ingersollrandproducts.com
CCN 99713117