Ingersoll-Rand 650937-XX3 Heat Pump User Manual


  Open as PDF
of 2
 
OPERATOR’S MANUAL 650937 -- X
R EL EA SE D: 8 -- 3 0 -- 9 6
REVISED: 6--4--10
(REV.
02 )
TWO--BALL PUMP SERIES
2.062 SQ.” HYDRAULIC MOTOR
0.4:1 RATIO
6” STROKE
INCLUDE MANUALS:6694X--X LOWER PUMPEND (PN 97999--012) &
FORM 3638--2 GENERAL INFORMATION MANUAL(PN 97999--353)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, T ROUBLESHOOTING
650937--X
400 SERIES STAINLESS STEEL
SERVICE KITS
• Use only genuine AROR replacement parts to assure compatible
pressure rating and longest service life.
• 637164 for repair of Hydraulic Motor section.
Service Note: The Hydraulic Motor Service/Parts Manual is not
shippedwith thepump butitis includedwith eachServiceKit. Ifthis
Service/Parts Information is needed, request the Hydraulic Motor
Operator’s Manual from ARO. (Manual 61588--100,
PN 97999--063).
• 637211- XX3 for repair of Lower Pump section.
Refer to the chart on page 2 for description of --XXX options.
SPECIFICATIONS
Model Series (Referto option chart) 650937--XX3..
Type Hydraulically Operated, Two--Ball....................
Ratio 0.4:1....................
Hydraulic Motor 61588--100............
Motor Repair Kit 637164..........
Motor Size 2.062 sq.’’ (13.3 sq. cm)..............
Stroke 6’’..................
Hydraulic Inlet 3/8’’ -- 18 NPTF--1(f)...........
Hydraulic Return 1/2” -- 14 NPTF--1(f).........
Lower Pump End Series 66941--XX3.....
Lower Pump Repair Kit 637211--XX3.....
Material Inlet 2” NPTF--1 (m).............
Material Outlet 1--1/4’’ NPTF--1(f)...........
PERFORMANCE
Hydraulic Inlet Pressure Range 50 -- 1200 PSI (3.4 -- 83 bar)
Fluid Pressure Range 20 -- 515 PSI (1.4 -- 35.5 bar).......
Max. Rec’d Cycles / Minute 50...
Displacement In
3
Per Cycle 59.79...
Volume / Cycle 33 oz. (979 ml).............
Cycles Per Gallon 3.86..........
Flow @ 50 Cycles / Minute 12.9 GPM (49.0 lpm)....
Noise Level N/A...............
PUMP DATA
Hydraulic Motor
61588--100
(SeeManual61588--100)
FIGURE 1
Material Outlet
1--1/4’’ NPTF--1(f)
146_FROMHYDRAULICINLET
Lower Pump
66941--XX3
(SeeManual6694X--X)
Hydraulic Inlet
3/8--18 NPTF--1(f)
(NotShown)
Spacer Section
45-9/16
(1157mm)
14-25/32
(375mm)
29-17/32
(750mm)
Accessory Available:61938--1 WallBracket and65139 FloorMounting Flange.
CONNECTOR(See Figure2)
MODEL 650937-XX3
CAPSCREW Y5--107--C(3)
WASHERY14--625--C ( 3)
SPACERROD 93347--1 (3)
Material Inlet
2’’ NPTF--1(male)
CAPSCREW 79186(3)
MOUNTING PLATE 93353--1
IMPORTANT
This is one of the four documents which support the pump.
Replacement copies of these forms are available upon request.
= 650937--X MODEL OPERATOR’S MANUAL
- GENERAL INFORMATION -- INDUSTRIAL PISTON PUMPS
- 6694X--X LOWER PUMP END OPERATOR’S MANUAL
- 61588--100 HYDRAULIC MOTOR OPERATOR’S MANUAL
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2010
www.ingersollrandproducts.com
CCN 99711517