Ingersoll-Rand PD20P-X-X Marine Sanitation System User Manual


 
E2010 CCN 20083440
(800) 276-4658 D FAX (800) 266-7016
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET  BRYAN, OHIO 43506
1:1 RATIO (NON-METALLIC)
2” DIAPHRAGM PUMP
OPERATOR’S MANUAL
PD20P-X-X
RELEASED: 12-16-02
REVISED: 10-9-10
(REV.
K)
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
PE20P-X-X
SERVICE KITS
Refer to Model Description Chart to match the pump material options.
637369 for air section repair (see page 6).
637373-XX forfluidsection repair(see page 4).NOTE: This kitalso con-
tains several air motor seals which will need to be replaced.
637374-X major air valve assembly (see page 7).
PUMP DATA
Models see Model Description Chart for “-XXX”...........
Pump Type Non-Metallic Air Operated Double Diaphragm.......
Material see Model Description Chart...........
Weight PX20P-FK
S-XXX 110.9 lbs (50.3 kgs)... .......
PX20P-FP
S-XXX 85.3 lbs (38.7 kgs).......
Maximum Air Inlet Pressure 120 p.s.i.g. (8.3 bar).........
Maximum Material Inlet Pressure 10 p.s.i.g. (.69 bar).....
Maximum Outlet Pressure 120 p.s.i.g. (8.3 bar)..........
Maximum Flow Rate
(flooded inlet) 184 g.p.m. (696 l.p.m.)....
Displacement / Cycle @ 100 p.s.i.g. 1.4 gal. (5.3 lit.)...
Maximum Particle Size 1/4” dia. (6.4 mm)............
Maximum Temperature Limits (diaphragm / ball / seal material)
E.P.R. / EPDM -60_ to 280_ F(-51_ to 138_ C)...........
HytrelR -20_ to 150_ F(-29_ to 66_ C)...............
Nitrile 10_ to 180_ F(-12_ to 82_ C).................
Polypropylene 35_ to 1
75_ F(2_ to 79_ C)...........
KynarR PVDF 10_ to 200_ F(-12_ to 93_ C)...........
SantopreneR -40_ to 225_ F(-40_to 107_ C)...........
PTFE 40_ to 225_ F(4_ to 107_ C).................
VitonR -40_ to 350_ F(-40_to 170_ C)................
Dimensional Data see page 8................
Mounting Dimension
8.18” x 14.16” (207.8 mm x 359.7 mm).....
Noise Level @ 70 p.s.i., 60 c.p.m. 85.0 db(A)
{.....
Thepump soundpressure levels publishedhere havebeen updated toan Equivalent
Continuous Sound Level(L
Aeq
) to meetthe intent ofANSI S1.13-1971, CAGI-PNEU-
ROP S5.1 using four microphone locations.
NOTICE: All possible options are shown in the chart, however, certain
combinations may not be recommended, consult a representative or the
factory if you have questions concerning availability.
Figure 1
MODEL DESCRIPTION CHART
PX20 P -F X S -X X X
PX20P - FXS - X X X
637373 - X X
DiaphragmBall
FLUID SECTION SERVICE KIT SELECTION
EXAMPLE: Model # PD20P-FPS-PAA
Fluid Section Service Kit # 637373-AA
Seat Material
P - Polypropylene
K - Kynar PVDF
Diaphragm Material
A - Santoprene M - Medical Grade Santoprene
C - Hytrel T - PTFE / Santoprene
G - Nitrile V - Viton
Hardware Material
S - Stainless Steel
Fluid Caps & Manifold Material
P - Polypropylene
K - Kynar PVDF
Fluid Connection
F - 2” A.N.S.I. / DIN Flange
Center Section Material
P - Polypropylene / Vinyl Ester
Ball Material
A - Santoprene T - PTFE
C - Hytrel V - Viton
G - Nitrile
Electronic Interface
D - None
E - Available