Filter
Top Products
VR209TP
11
AM/FM/RBDS CONTROLS
Enter FM/AM Mode
• Press the AUDIO button (4) on the front control panel to access Audio mode (if needed).
• Touch the AM/FM button on the touch screen to access AM/FM mode.
Information Bar
The top portion of the touch screen is the information bar. Information such as the current band and
station, ST icon, and system clock is displayed on the information bar.
Select a Band
Touch the BAND button on the left side of the touch screen to change between FM and AM bands.
Tuning
• Touch the TUNE + or TUNE - buttons on the touch screen to tune up or down in one step
increments.
• Touch the SEEK + or SEEK - button to seek the next strong station.
Preset Stations
18 FM or 12 AM numbered preset stations are listed on the touch screen and can be selected when
touched. The selected station is displayed in highlighted font with a highlighted frame. All 18 presets
can be navigated using the up/down arrows to the right of the list.
To store a station:
1. Tune radio to desired station (large display mode is shown when tuning).
2. Touch the PRESET button to return to the interface showing the preset list.
3. Touch and hold a preset location on the screen until the station is stored and appears in the
preset list.
NOTE: Only six presets are displayed at one time. Touch the up/down arrows to the right of
the list to access the next group of stored presets.
11
7
13
3
2
6
4
5
1
8
9
10
12