Ceiling Mounted Projector Bracket
KAMNTPROJBA
Quick Start Guide
Caution
This product contains small parts that may be a choking hazard if swallowed. Keep all small parts away
from young children.
• Make sure these instructions are read and understood before attempting installation. If you are
unsure of any part of the installation, please contact the Kogan.com customer support team for
further information.
• The wall or mounting surface must be capable of supporting the combined weight of the mount
and the display unit, otherwise the structure must be reinforced. Kogan.com is not liable for any
damage caused by structural integrity not being up to the task.
• Safety gear and proper tools must be used at all times. A minimum of two people are required to
perform this installation. Failure to use safety gear can result in property damage, injury or even
death.
• Please check joints and all moving parts every two months, making sure that the screws have not
loosened over time.
This product is designed to be installed on wood stud walls or solid concrete. Before installing, make sure
that the wall will support the combined weight of the equipment and hardware. Never exceed the
maximum load capacity of 8KG, as this can result in product failure or personal injury.
Note: this product is intended for indoor use only. Use of this product outdoors may result in product
failure or personal injury.
Parts List
Tools Required
