Filter
Top Products
RPPD1000 PowerDrive 1000 Wa Power Inverter
Here are some addi onal ps, to help you get the best performance
from your PowerDrive 1000 wa inverter.
1. Save your receipt, you will need this if you ever need warranty service.
2. If you need to extend the length of the stock cables (36” 4 gauge are included), you must use a larger gauge
wire. (2 gauge is recommended up to 6 feet. Over 6 feet Ø gauge.)
3. Do not use extension cords or mul -taps on the inverter. One device per outlet.
4. Supply plenty of fresh air. A hot inverter will not be able to supply full power and will shut down if it be-
comes too hot. It is best to mount it in a loca on that is cool, like the passenger cab, away from an outside
wall, and not in a cargo box.
5. Mount/store in a dust free environment. A build up of dirt will keep the inverter from being able to cool
properly.
6. The power consump on formula for wa s and amps is:
(volts X amps = wa s) or (wa s ÷ volts = amps)
If you want to add fuses to your inverter: 1000 wa s ÷ 12 volts = 84 amps. We recommend a
“T” fuse.
If you can use your refrigerator with the inverter, look on the refridgerator for the amperage rat-
ing on the compressor motor, for example 7.5 amps: (120 volts X 7.5 amps = 900 wa s) NOTE:
Appliances with compressors may need three to four mes the running power for start-up.
Microwaves are sold adver sing their cooking power, not the amount of power they consume.
A 900 wa microwave may use more, or less than 900 wa s. Consult your owner’s manual, or
the back of the microwave oven for power consump on. (wa s or amps)
7. Keep in mind that for the inverter to run at full power for an extended period of me, the inverter must be
supplied with full power. With a 1000 wa inverter that means 84 amps, most alternators are not that
powerful.
Think of the ba ery as a bath tub, water (power) is going down the drain to the inverter, at the same me
water (power) is fi lling the tub (ba ery) from the spigot, (alternator) if the power fl ow going out is greater
than the power fl ow coming in, eventually the tub (ba ery) will be empty, and the inverter will cease to work
properly.
Technical/Additional
Information
©2009 PowerDrive a RoadPro Family of Brands
Contact PowerDrive by calling tool free 866-622-7979 8:30am — 5:00pm EST or e-mail techsupport@roadprobrands.com
RPPD1000AMD0809