Filter
Top Products
Page 19
* Functional differences exist whereby
Ethernet V2.0 repeaters are not
supported by the 10BASE-FB
Transceiver. If you are in doubt about
the type of your repeater, contact your
3Com supplier for more information.
Connecting Fiber Cables
To connect fiber cables to the transceiver:
1. Remove the plastic protection caps from the
fiber optic port only when ready to install
cables. Transceiver ports that are not in use
should remain capped.
2. Ensure that transmit and receive cables are
clearly marked or color coded and are
connected to the appropriate ports on the
Transceiver.
3. Ensure the cables have been properly
cleaned with an appropriate fiber optic
cleaning solution before installation.