3Com 5101T-FB-SMA Marine Radio User Manual


 
Page 20
4. Connect the remote end of the fiber optic
cables to the 10BASE-FB Star Coupler, ONline
Ethernet 10BASE-FB Module, or ONcore
Ethernet 10BASE-FB Module ports. Ensure
the transmit fiber at one end connects to a
receive port at the other end.
Connecting the AUI Cable
Apply power to the transceiver by connecting it
to:
AUI transceiver cables
Directly to AUI connectors coming from
active IEEE 802.3/Ethernet nodes
Upon powerup, the transceiver status indicator
and the port status indicator on the other unit
(Star or Ethernet 10BASE-FB Module port) stops
blinking and turns on solid.
Connect the 10BASE-FB Transceiver to an
Ethernet device using proper AUI (transceiver)
cables.