Filter
Top Products
PrintingPrinting
Serial
19
Printing
The recorded data can be sent to a computer through the serial RS232 port or to a
parallel printer. Serial transmission requires Quest cable #54-715. Parallel
transmission requires Quest cable #56-875. With the cable plugged in, select
PRINT from the menu and press the I/O Enter key to enter the PRINT mode.
Begin printing by pressing the I/O Enter key. Press the key again to abort
printing.
Serial
3M
TM
Detection Management Software (DMS) is recommended for downloading,
storing, and graphing your data. Communications programs such as Window’s
Hyperterminal may also be used to capture the printout into a file. The baud rate
is fixed at 9600.
Figure 1-25: DMS Report example
Printing