Filter
Top Products
Y1-03-0146E 10
7. Replacement Parts List (See Figure 1 for additional details)
a. Flashguard shield assembly, ACR P/N 4463
b. Battery door assembly, ACR P/N 9338
c. IR Filter, ACR P/N 4459
Item a. comes complete with blue filter, IR filter and labels.
Item b. comes complete with retention cable, battery cover screw, door
and o-ring.
8. Parts Replacement Procedures
a. To replace flashguard
Remove the old flashguard by grasping the flashguard with one hand
and the light body and lanyard in the other. Pull them sharply away
from each other. Then slide the new flashguard in place until it clicks
into the locked position.
b. To replace the battery door
Unscrew the wire cable from the insert in the battery compartment. To
install new battery door, screw the cable end through the insert in the
battery compartment. The cable is held in place after the threaded
cable-end goes all the way through the insert.
c. To replace the IR filter
Remove the old filter by locking it in the IR position, then slide a 7 level
screwdriver between the flashguard case and the IR filter attachment
leg twist the screwdriver or pry upward and the leg will pop off of the
retainer. Put the replacement filter into place then press with thumb to
seat legs over retainers.