- INSTRUCTIONS -
The NE-SSV is a 2-gang vandal and weather resistant sub station designed for use with the NEM, NDR and NDRM
systems. It is constructed of 12 gauge stainless steel and has a stand alone color camera built in. It is also equipped with
an option for an external output contact closure when the sub station places a call (relay required). The unit either flush
mounts into a 2-gang box, or surface mounts using the SBX-2G. Each unit includes a 12V DC power transformer for the
camera, tamper proof screws, and a tool for installation.
Vandal Resistant Sub Station with built in Color Pinhole Camera for use with
NEM, NDR, NDRM Systems
INSTALLATION:
1. For flush mounting, install sub station in standard 2-gang electrical box with minimum 2-1/2" depth.
2. For surface mounting, use the SBX-2G surface mount enclosure (sold separately).
3. Only the 12V DC power transformer included should be used to power the NE-SSV camera.
5. IMPORTANT! These units are designed for use in normal weather conditions, and to allow drainage and
evaporation of moisture that naturally gets into the unit. Do not apply caulking or silicone sealant around the
unit when installing, and do not use weather stripping around the perimeter of the box when mounting. If
sealing the unit is required, the bottom must remain unsealed. Sealing the unit will prevent or inhibit moisture from
dissipating from inside the unit, which may cause corrosion or deterioration of the internal components over time.
Page 1
45cm
18”
67cm
26½”
Transparent corner shadowing
on the picture is normal.
Front View Back View
The view achieved if the subject is 20" from the
camera is: 18" Vertically and 26½” Horizontally
Speaker
Camera
Call button
50cm / 20”
50cm
20”
0607