Filter
Top Products
Version 1.0 ©Copyright 2010, Ambient LLC. All Rights Reserved. Page 2
1. Introduction
Thank you for your purchase of the Ambient Weather WS-0202 Wireless Rain Gauge with Indoor
Temperature. The following user guide provides step by step instructions for installation, operation
and troubleshooting. To download the latest manual and additional troubleshooting tips, please visit:
http://ambientweather.wikispaces.com/ws0202
2. Getting Started
Note: The power up sequence must be performed in the order shown in this section (remote rain
gauge transmitter first, Display Console second).
The WS-0202 weather station consists of a display console (receiver), and a rain guage (remote
transmitter).
2.1 Parts List
QTY
Item
1
Display Console
Frame Dimensions (LxWxH): 4.50 x 2.75 x 1.25 in
LCD Dimensions (LxW): 2.0 x 1.5”
1
Rain Gauge
Dimensions (LxWxH): 4.75 x 2.75 x 3”
2.2 Recommend Tools
Philips screwdriver
Drill for mounting rain gauge
2.3 Rain Gauge Sensor Set Up
Note: To avoid permanent damage, please take note of the battery polarity before inserting the
batteries.
1. Remove the rain gauge cover, as shown in Figure 1. Push in the side tabs on both sides of the
rain gauge cover and lift to expose the base.
2. Remove the battery cover, as shown in Figure 2. Lift both sides of the battery cover, exposing
the battery compartment.
3. Insert two AA batteries into the battery compartment , as shown in Figure 3. Replace the
battery cover and the rain gauge cover.