Filter
Top Products
APC A/V J Type Power Conditioner and Battery Backup2
Components
Front view
Rear view
SETUP button - Push to scroll through the Setup menu screens. Press and hold for three seconds to save the current
screen as the default screen.
STATUS button - Push to scroll through the menu screens. Press and hold for 10 seconds to view the Diagnostic
menu screens.
LCD Display
ON/OFF button - Push this button to apply power to the outlets. Note that the unit will continue to provide surge
protection, even if it is off.
UP/DOWN buttons - Use the up and down buttons to scroll through options on the menu screens.
Removable front bezel - The front bezel can be removed to connect the battery, or to replace the battery.
Coaxial surge-protected, input and output jacks
Battery backup outlets with surge protection and noise filtering; voltage regulation is available on the J35B model
Surge-protected outlets with noise filtering
Circuit breaker reset button
120V input outlet, use with the supplied input power cord
Building wiring fault indicator (See “Troubleshooting” on page 9.)
TVSS ground screw. Use a wire to connect any ungrounded component to this screw. Connecting to the TVSS
screw will prevent sound or video interference from ungrounded equipment.
Telephone line surge-protected, input and output jacks
USB port for use with optional PowerChute Personal Edition software, available as a free download at
www.apc.com. In the event of a power outage, this software will save files and gracefully shut down the computer.
Use the supplied USB cable to connect the UPS to the home computer.
Controlled by Master outlet (J35B only)
Controlled by Master outlets (J35B only)
Master outlet (J35B only)
av022a