Filter
Top Products
www.apricorn.com 7
FAQ’s
How do I verify the installation on Windows XP?
1.Right click on “My Computer” icon, select Properties”, left click on Hard-
ware tab and then on “Device Manager” button.
2.Double click on “SCSI and RAID Controllers”, if there is no yellow “!” or
“?”
in front of “Silicon Image Sil 3132 SATALink Controller”, the driver is started
correctly.
3.To view information about the devices attached to the controller, use the
SilCfg Utility and click on the device from the list.
How do I update a new driver on Windows XP?
1.Right click on My Computer” and select Properties”. Under the System
Properties” section, click on Hardware” tab and then on Device Manager
click SCSI and RAID Controllers” and right click “Silicon Image Sil 3132
SATALink Controller” then select Properties” from the context menu.
2.Click Driver”, Update Driver” and select Search for a suitable driver for
my device [Recommended]1. Insert the Driver CD in your CD-ROM /DVD
drive. Click Next” and complete the driver installation.
3.System will go through the enumeration process and install the driver. At
the end of the process, click “Yes” to reboot your system when necessary.
4.See instructions in section 2.4 to verify controller was installed correctly.