Filter
Top Products
If you have any questions or concerns – please call AudioQuest at (949) 585-0111
or email: info@audioquest.com
3
Step 5
Trim wires to 0.5” and squeeze the cable with
pliers to make putting the plug on much easier.
Step 7
On Side #2, place the twisted drain wire between
the strain relief and then crimp and trim it.
Step 6
Insert wires and separator into the plug and
crimp tightly.
CAT700 Termination Manual
Step 4
Cut wires at an angle so they can be inserted
easily into plastic separator.