Filter
Top Products
iv
202 Islander
®
6. hull iDenTificaTion nuMber (hin)
The “Hull Identication Number” located on the
starboard side of the transom, is the most important
identifying factor and must be included in all
correspondence and orders. Failure to include it
creates delays. Also of vital importance are the
engine serial numbers and part numbers when
writing about or ordering parts for your engine. Refer
to the Engine Operator’s Manual for locations of
engine serial numbers and record them for future
reference.
7. ManufacTurer’s cerTificaTion
As a boat manufacturer, Baja builds its products
to guidelines established under the Federal Boat
Safety Act of 1971. The Act is promulgated by the
United States Coast Guard who has authority to
enforce these laws on boat manufacturers that sell
products in the United States. Baja ensures that all
of its products comply with these laws.
The National Marine Manufacturers Association
(NMMA) provides Baja with a third party certication.
The NMMA is an organization that represents the
marine industry and assists manufacturers, boat
dealers, marinas, repair yards, and component
suppliers in areas of legislation, environmental
concerns, marine business growth, and state and
federal government agency interaction. The third
party certication that Baja participates in uses the
well known Standards and Recommended Practices
of the ABYC, American Boat and Yacht Council.
Baja Marine Corporation participates extensively
in the American Boat and Yacht Council which is a
nonprot organization that develops and publishes
voluntary standards and recommended practices for
boat and equipment design, construction, service,
and repair. We utilize all applicable ABYC standards
in the construction of our boats.
Finally, Baja sells their products world wide and
as such must conform to the various rules and
regulations required by other countries. Most
notably, are the ISO standards in Europe which
require the application of the CE (Common
European) mark. This mark, much like the NMMA
certication in the U.S., gives you, the boat owner,
specic information concerning your craft.
8. service, parTs anD repair for
Your boaT
When your boat needs service, parts or repair,
take it to an authorized Baja
®
Marine dealer. To
nd a dealer in your area visit our website at www.
bajamarine.com or call:
Domestic/International
1-865-971-6270
Fax: 1-865-971-6716
To nd repair and parts facilities for the equipment
installed on your boat, refer to the manual for that
component.
If an issue is not handled to your satisfaction:
1. Discuss any warranty-related issues directly with
the service manager of the dealership or your
sales person. Give the dealer an opportunity to
help the service department resolve the matter
for you.
2. If an issue arises that has not been resolved to
your satisfaction by your dealer, contact Baja
®
Marine at 1-865-971-6270 and ask to speak with
a customer service representative.
hIn nuMBer
hull IdentIFICatIon nuMBer loCatIon
(FIg. Iv.1)
IntroduCtIon