Barco MFGD 3220 D Marine Radio User Manual


 
MFGD 3220D User's Guide 10
Keep your original packaging. It is designed
for this display and is the ideal protection
during transport.
Avoid reflections in the flat panel to reduce
eye strain.
Place the display on a strong and stable
table or desk.
Keep the display away from heat sources
and provide enough ventilation in case it is
built in a rack or console.
Make sure the computer is switched off
before connecting the signals.
Do not block or cover the openings in the
external power supply block. Also, do not
turn the power supply upside down or at its
side. Doing so would cause overheating of
the power supply.
2.2. Before installing the display
Important:
In the factory, the height-positioning system in the
display foot is blocked with a strap to prevent
damage during transportation.
Before installing the display, you must remove this
strap.
To remove the strap:
1 Position the display with its rear side facing
you.
2 If the foot cover is mounted on the foot, lift
up the 2 clips of the foot cover to release the
cover from the foot.
3 Pull the lower side of the cover towards you
and simultaneously slide the cover
downward.
2. INSTALLATION
2.1 Precautions