Filter
Top Products
Initial Set-Up
1. Unlike conventional jackboxes, the 1216-USB must have power
connected in order to function. The power connector is
located at the rear of the jackbox unit. Plug the included power
adapter into the USB jackbox.
2. Plug the adapter into a standard 120 volt 50-60Hz AC outlet.
Be sure the plug blades are fully inserted. Since there is no on/o
switch on the unit, it is “on” once it is plugged in.
Connecting to a computer via USB
1. The jackbox is designed to work with a computer and plug in
via a USB connector. Plug the USB cable on the jackbox into your
PC. The PC may come up with a message stating that it
recognizes a new audio device is connected. If you are running
Windows 98 or earlier, the PC may not be able to recognize the
USB device immediately. You may have to download drivers
from Microsoft or the maker of your operating system.
2. In Windows XP, you can set the Jackbox to be the default audio
output device and input device. To do this, open the “Sounds
and Audio Devices” control panel. Click the “Audio” tab. Under
“Sound Playback” select the device “C-Media USB Headphone
Set”. Under “Sound recording” select the “C-Media USB
Headphone Set” as the default device. Once this is complete,