Filter
Top Products
8
Moon Phase
Track the phases of the moon, conveyed through simple lunar phase icons:
High & Low Records
“Today” temperature records automatically clear daily at midnight. “Month”
temperature records automatically clear at midnight on the last day of the
month.
• To manually clear the HIGH recorded values, press and HOLD the “ ”
button. Dashes display to conrm you have cleared the HIGH records.
• To manually clear the LOW recorded values, press and HOLD the “ ”
button. Dashes display to conrm you have cleared the LOW records.
Troubleshooting
Problem Possible Solution
No outdoor sensor
reception
no bars
If the wireless signal indicator shows no bars:
• Relocate the display unit and/or the outdoor sensor.
The units must be within 165 ft (50 m) of each other.
• Make sure both units are placed at least 3 feet (.9 m)
away from electronics that may interfere with the
wireless communication (such as TVs, microwaves,
computers, etc).
• Use standard alkaline batteries (or lithium batteries in
sensor when temperature is below -4ºF/-20ºC). Do not
use heavy duty or rechargeable batteries. NOTE: It
may take up to 20 minutes for display unit and sensor
to synchronize after batteries are replaced.
Display screen
not working
• Check that the batteries are installed correctly.
Batteries may need to be replaced.
• Reset the display by pressing the reset button, located
on the back of the display unit. Date and time will
need to be entered after a reset.
NEW
WAXING
CRESCENT
1ST
QUARTER
WAXING
GIBBOUS
WANING
GIBBOUS
FULL LAST
QUARTER
WANING
CRESCENT