Filter
Top Products
SKU 95519 For technical questions, please call 1-800-444-3353 PAGE 3
appliance should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user.
Double insulated tools and appliances are equipped with a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. Do not
change the plug in any way. Double insulation eliminates the need for the three
wire grounded power cord and grounded power supply system.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges,
and refrigerators. There is an increased risk of electric shock if your body is
grounded.
Do not expose power tools and appliances to rain or wet conditions. Water
entering a power tool or appliance will increase the risk of electric shock.
Stay alert. Watch what you are doing, and use common sense when operat-
ing this product. Do not use this product while tired or under the influence
of drugs, alcohol, or medication. A moment of inattention while operating this
product may result in serious personal injury.
PERSONAL SAFETY
Use safety equipment. Always wear ANSI-approved safety impact goggles when
using this product.
TOOL USE AND CARE
Do not force this product. Use the correct product for your application. The
correct product will do the job better and safer at the rate for which it is designed.
Do not use the Inverter if the Power Switch does not turn it on or off. Any
product that cannot be controlled with the Power Switch is dangerous and must be
replaced.
Turn off the Inverter and unplug it from its Power Cord before making any ad-
justments, changing accessories, or storing a tool or appliance. Such preven-
tive safety measures reduce the risk of starting the tool or appliance accidentally.
Store the Inverter out of reach of children and other untrained persons. This
product may be dangerous in the hands of untrained users.
Maintain this product with care. Keep the Inverter clean and dry. Properly main-
tained power equipment are less likely to bind and are easier to control. Do not use
this product if damaged. Tag a damaged Inverter “Do not use” until repaired.
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect this product’s operation. If damaged,
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.