Filter
Top Products
OperationOperation
LED Display
All needed information is displayed.
Select Channel
Turn power ON.
LED Display
7
Note
For quick advance,push and hold
arrow key(s).
Note
When switching from one chan-
nel to another, squelch will need
to be reset. See Setting Squelch
on page 4.
Note
TX/Batt Indicator
This LED will illuminate red when
the PTT button is pushed and
held (this means your unit is
transmitting) or batteries are
low and need recharging or
replacement.
Charge/Pwr Save Button
The Charge/Pwr Save LED will
illuminate red when Power Save
button is pushed or when charg-
ing NiCad batteries with charger
plugged in.
6
Select Channel
For higher channel,
push UP arrow key.
For lower Channel,
push DOWN
arrow key.
1
2
3
37st manual layout.5 10/1/98 9:56 AM Page 12