Filter
Top Products
To Turn VG-2 and Spectre 1 Alerts On and Off
While no signal
is being detected,
press and hold
the Dim button
for two seconds
again.
Tone Voice
Visual Display
Two beeps Spectre
VG-2 On
V will blink twice
in the display
To Turn K Band On and Off
While no signal
is being detected,
press and hold both
the Dim and City
buttons for two
seconds.
Tone Voice
Visual Display
Two beeps K On
K will blink twice
in the display
Mute Button
Press and hold for
two seconds
Settings
Your Detector
Nothing Comes Close to a Cobra
®
13
Settings
Your Detector
12
English
VG-2, Spectre 1 Alert Audio Settings, K & Ku Band Detection
The detector is undetectable by police VG-2 and Spectre 1 radar detector
detectors and will alert you when such a device is in use near your vehicle.
During the alert, the unit continues to detect other signals. You can choose
whether or not you want your unit to show VG-2 and Spectre 1 alerts.
The factory setting is VG-2 and Spectre 1 alert off.
Voice/Tone Setting
You can set your detector to sound alerts with either a Voice
or a Tone. You can change settings by using the Mute button.
In Voice Alert mode, you will first hear several tones, then a
voice message announcing the type of signal detected, followed
by more tones. In Tone Alert mode, you will hear the tones only.
The factory setting is Voice Alert mode.
To Change From Voice Alert to Tone Alert
While no signal
is being detected,
press and hold
the Mute button for
two seconds.
Tone Voice
Visual Display
One beep Tone Alert None
To Change From Tone Alert Back to Voice Alert
While no signal
is being detected,
press and hold
the Mute button
for two seconds
again.
Tone Voice
Visual Display
None Voice Alert None
Dim Button
Press and hold
for two seconds
On/Off Indicator
X K Ka V S
c
To Turn Ku Band* On and Off
While no signal
is being detected,
press and hold
the City button
for two seconds
again.
Tone Voice
Visual Display
Two beeps Ku On
X and K will blink
twice in the display
K will blink once
in the display
One beep
K Off
Ku Off
X and K will blink
once in the display
One beep
* The new Ku band may be introduced to North America in
the future. To prevent false alerts until it is, the factory default
for Ku band detection is off.
Spectre
VG-2 Off
V will blink once
in the display
One beep
9493 XRS 9430-D-B2 4/10/06 11:54 AM Page 12