Filter
Top Products
12D-Link DNS-323 User Manual
Section 3 - Configuration
Configuration
When first powered on, during the initial boot sequence, the DNS-323 will wait to be assigned an IP address via DHCP. If it
does not receive an assigned IP address, by default it will have a self-assigned IP address of 192.168.0.32. It is recommended
to use the included D-Link Easy Search Utility when accessing and configuring the DNS-323 for the first time. If you want to
change the IP address before logging in or are unable to connect to the DNS-323 IP address, you can use the Easy Search
Utility provided on the product CD to locate the device on your network and make any needed changes.
The Easy Search Utility displays all available DNS-323
devices on the network here.
Refresh the device list.
Click Configuration to access the Web-based utility of
the DNS-323.
Click Language if you wish to store non-English character
files. Refer to page 74.
Click BitTorrent to use the built-in BitTorrent manager to
upload and download Torrents. Refer to page 59.
Configure the LAN Settings for the DNS-323 here.
Click Apply to save and activate the changes to the LAN
Settings.
Volumes available for mapping are displayed here.
Choose an available drive letter. Click Connect to map
the selected volume. Click Disconnect to disconnect the
selected mapped volume.
Click Exit to close the utility.
Network Storage
Device
Refresh
Configuration
Language
BitTorrent
LAN
Apply
Drive Mapping
Available Drive
Letters
Exit
Easy Search Utility