Filter
Top Products
12
12
MEMO Modus
Using the 5 direct channel buttons You can switch at any time from the present
channel (normal channel modus) to the 5 programmable stored stations (MEMO
modus) and switch back again.
Recall direct channels
• Press one of the 5 direct channel buttons briefly. The unit will switch to the pre
programmed channel. The channel number and the button number will displayed.
The manufacturer has pre-programmed your AE 5090 for some commonly-used
channels:
• Channel 1 recommended call channel on FM
• Channel 4 recommended as call channel for AM
• Channel 9 international calling and emergency channel
In Germany particularly this Channel 9 (in AM) is also used by all truck drivers. This
means: a large number of stations are listening in. If the worst comes to the worst
(e.g. in case of accident etc.) there is a good chance that someone will be listening.
To call other stations, who you know are listening in on channel 9, you can also use
this channel. Call up the desired station on channel 9. As soon as contact has been
made, agree on a free channel for your conversation and then channel 9 will be free
again for other calls.
An emergency channel can of course only work if as many stations as possible are
listening in. Therefore listen in to this channel as often as possible.
• Channel 19: Trucker channel in France, Spain and Italy (in AM).
• Channel 40
Programming one of the 5 direct channel buttons
You can re-programme each of the 5 numbers of the memory positions to any
desired channel (e.g. private channels or club channels):
• Choose when in normal modus the desired channel and the modulation
mode AM or FM (where allowed).
• Press the M button briefly (ME for Memory Enable appears on the display)
• Within the next 5 seconds press the desired direct channel button (1 to 5)
The desired channel is now stored on the direct channel button selected. You will
see both channel number (large) and direct button number (small) in the display.
The station will remain stored as long as the power supply is not interrupted or until
You make a reset procedure for country switching.
Please note that the German channels 41-80 can only be stored and recalled from
Memory in the 80/40 mode!