Eagle Electronics 250 DF Fish Finder User Manual


 
39
Sensitivity set to manual mode (left). Sensitivity scroll bar (right).
You can change the sensitivity level whether you are in Auto Sensitivity
mode or Manual Sensitivity mode. The adjustment method works the
same in both modes, but provides slightly different results.
To adjust sensitivity in Auto Mode:
Repeatedly press
MENU until the SENSITIVITY menu appears. Make sure sen-
sitivity is set to Auto, then press
MENU UP to access the sensitivity
scroll bar. Press
to increase sensitivity, to decrease it. When it is set at
the desired level, press
PWR to clear the menu. If you reach the maximum
or minimum sensitivity level, a tone will sound.
To adjust sensitivity in Manual Mode:
If you want to change the sensitivity in Manual Mode, repeatedly press
MENU until the SENSITIVITY menu appears. Press to select MANUAL, then
press
MENU UP to access the sensitivity scroll bar. Press to increase sen-
sitivity,
to decrease it. When it is set at the desired level, press PWR to
clear the menu.