Filter
Top Products
1
Safety Information
A Warning identifies conditions and procedures that are
dangerous to the user. A Caution identifies conditions
and procedures that can cause damage to the Product or
the equipment under test.
XWWarning
To prevent possible electrical shock, fire, or
personal injury:
• Use the Product only as specified, or the
protection supplied by the Product can
be compromised.
• The battery door must be closed and
locked before you operate the Product.
• Replace the batteries when the low
battery indicator () shows to prevent
incorrect measurements.
• Do not use and disable the Product if it
is damaged.
• Read all safety Information before you
use the Product.
• Do not use the Product in damp or wet
environments.
• Batteries must only be changed in an
area known to be non-hazardous.
Explosion hazard.
• Do not use the RS-232 interface in
hazardous areas.
WCaution
To avoid possible damage to Product or to
equipment under test:
• If the display reads “OL” the range limit
is exceeded and the pressure source
must immediately be removed.
• Do not exceed the maximum torque
allowed. Maximum torque allowed is
13,5 Nm = 10 ftlbs.