Filter
Top Products
If you forget the password, you must reset the
unit to access the databank.
Use the end of a straightened paper clip to
gently press the reset button located on the
back of your unit.
If the unit does not reset after pressing the
reset button, remove the batteries, wait at least
two minutes, and then re-install them. For
battery instructions, see “To Install or Change
Batteries”.
Warning! Resetting the unit erases all user-
entered information. Always keep written copies
of your data.
To Set a Password
1. Press .
2. Use to highlight Set Password and press
ENTER to select it.
3. Type a password and then press ENTER.
Your password can have up to 8 letters.
You are prompted to retype your password.
4. Type your password again exactly as you did
the first time.
5. Press ENTER to confirm and enable your
password.