Furuno 1722 Marine RADAR User Manual


 
SP - 4 E3494S01K
Wind: MWV>VWT>VWR
Water Temperature: MTW
Time: ZDA
*1
: calculated by magnetic deviation
4.6. Output Data
Alarm signal 12 VDC, 100 mA or less
NMEA 0183 Ver1.5 GGA, GLL, RMA, RMC, GTD, VTG, ZDA (GPS data required)
RMB, WPL, BWC or BWR, APB, AAM, BOD, XTE, VHW, MTW,
DPT or DBT, DBS (ETR required), TTM (ARPA required)
5. PLOTTER FUNCTION
5.1 Projection Mercator
5.2 Usable Area 85 latitude or below
5.3 Effective Area 133.4 x 97.3 mm
5.4 Display pixels 240 x 320 dots (M1722 series), 234 x 320 dots (M1722C series),
480 x 640 dots (1723C series)
5.5 Position Indication Latitude/longitude, Loran C LOP or DECCA LOP
5.6 Effective Projection Area 0.125 nm to 2,048 nm (at equatorial area)
5.7 Track Display Plot interval: by time (1 s to 99 m 59 s) or
by distance (0 to 99.9 nm)
5.8 Colors Red, yellow, green purple, light-blue, blue, white
5.9 Memory Capacity Track/mark: 8000 points, Waypoint: 999 points
5.10 Storage Capacity Simple route: 200 routes with 35 waypoints each
5.11 MOB 1 point
5.12 Quick Routes 1 course with 35 waypoints max.
5.13 Electronic Chart FURUNO chart card or NAVIONICS chart card available
C-MAP chart card also available for C-MAP NT Model
5.14 Alarms Arrival and anchor watch, Cross track error and proximity alarms,
Ship’s speed in and out alarms, Water temperature, Trip alarm,
Bottom alarm, Fish alarm (ETR required)
6. POWER SUPPLY
6.1 Rated Voltage/Current
M1722 12-24 VDC: 3.8-1.9 A
M1732 12-24 VDC: 3.8-1.9 A
M1742/1752 12-24 VDC: 4.6-2.3 A
M1762 12-24 VDC: 5.7-2.9 A
M1722C 12-24 VDC: 4.0-2.0 A
M1732C 12-24 VDC: 4.0-2.0 A