Furuno 1724C Marine RADAR User Manual


 
18
DATA1 to DATA3 ports
These ports connect to the equipment shown in the table below.
DATA1 (7P) DATA2 (6P) DATA3 (7P)
GPS receiver GP-310B/320B,
NMEA equipment
Heading sensor
(ex. SC-60/120)
RS-232C OUT, NMEA 0183 IN,
External buzzer OUT
Note: No sensor can be directly connected to the DATA3 port.
This equipment can receive the following NMEA 0183 format sentences from other
equipment.
Own ship’s position: GGA>RMC>RMA>GLL
Ship’s speed: RMC>RMA>VTG>VHW
Destination waypoint: RMB
Heading (True): HDT>HDG>HDM
Course: RMC>RMA>VTG
Depth: DPT>DBT
Temperature: MTW
Time: ZDA
Other ship’s information: TTM
Insight satellite information: GSV
Wind speed and angle: MWV>VWT>VWR
NETWORK port
This port connects other NavNet equipment, with the optional NavNet cable. Available
equipment are shown in the table below.
Radar Plotter Network sounder Other
MODEL1724C/1734C GD-1720C
ETR-6/10
ETR-30N
HUB (used when more
than two NavNet units
are connected.)