Filter
Top Products
3. PLOTTER OPERATION
3-35
3.8.4 Changing waypoint mark size (FURUNO, NavCharts™)
You may change the size of all waypoint marks to small or large (default), or you
may turn them off.
1. Press the [MENU] key to open the menu.
2. Press the CHART SETUP and CHART DETAILS soft keys.
LAT LON GRID
ON
TEXT INFORMATION
ON
WAYPOINTS
LARGE
WAYPOINT NAMES
ON
CHART BORDER LINES
ON
LANDMASS
BRIGHT
NAVAIDS
ON
LIGHT SECTOR INFO
ON
OTHER SYMBOLS
ON
MARKS SIZE
LARGE
MODEL1722 series
LAT LON GRID
GREEN
TEXT INFORMATION
ON
WAYPOINTS
LARGE
WAYPOINT NAMES
ON
CHART BORDER LINES
ON
LANDMASS
BRT YELLOW
BACKGROUND
BLUE
NAVAIDS
ON
LIGHT SECTOR INFO
ON
OTHER SYMBOLS
WHITE
MARKS SIZE
LARGE
MODEL1722C/1723C series
CHART
DETAILS
CHART
DETAILS
EDIT
CNTOUR
LINE
RETURN
EDIT
CNTOUR
LINE
RETURN
Chart details menu
3. Use the cursor pad to select WAYPOINTS.
4. Press the EDIT soft key.
5. Use the cursor pad to select LARGE, SMALL or OFF.
LARGE: Shows mark in actual shape.
SMALL: Displays all waypoints with an “X” regardless of mark shape
selected.
OFF: Turns off all waypoints and their names. Waypoints which are part
of the route in use or the waypoint which is set as destination are
(is) always shown regardless of this setting.
6. Press the ENTER soft key or [ENTER] knob to register your selection.
7. Press the [MENU] key to close the menu.