Filter
Top Products
5. CUSTOMIZING YOUR UNIT
5-2
Contents of general setup menu
Item Description Settings Default Setting
Key Beep Turns key beep on/off. On, Off On
Language Chooses menu language.
English, French,
German, Italian,
Portuguese, Spanish
English
Range Unit
Chooses unit of range and speed
measurement.
nm, kt; km, km/h; sm,
mph; nm & yd, kt; nm &
m, kt; km & m, km/h; sm
& yd, mph
nm, kt
Temperature
Unit
Chooses unit of water temperature
measurement.
°C,°F °F
Depth Unit Chooses unit of depth measurement.
ft, m, fa,
P/B (Passi/Braza)
ft
Temperature
Source
Chooses source of water temperature
data.
ETR, NMEA. Select ETR
to show water
temperature data fed
from the network
sounder.
NMEA
Depth Source Chooses source of depth data.
ETR, NMEA. Select ETR
to show depth data fed
from the network
sounder.
NMEA
Reset Trip
Log
Resets distance run to zero. Yes, No No
Lat/Lon
Display
Chooses how many digits (or seconds)
to display after decimal point in latitude
and longitude position.
DD°MM.MM’,
DD°MM.MMM’,
DD°MM.MMMM’,
DD°MM’SS.S”
DD°MM.MMMM’
TD Display Chooses TD type. Loran C, Decca Loran C
Speed Chooses speed format to display.
SOG (Speed over
ground), STW (Speed
through water)
SOG
Position
Display
Chooses position display format. LAT/LON, TD LAT/LON
Time Display Chooses time notation. 12 hours, 24 hours 24 hours
Infrared
Remote
Mode
A remote controller can be set
exclusively for use with a specific
display unit, in the case of multiple
NavNet display units. For further details
see the Installation Manual.
A, B, C, D A
Range &
Bearing
Mode
Chooses how to calculate range and
bearing.
Rhumb Line: Straight
line drawn between two
points on a nautical
chart.
Great Circle: Shortest
course between two
points on the surface of
the earth.
Rhumb Line
(Continued on next page)