Filter
Top Products
1-6
9. Connect the wire to the RF unit, referring to the illustration on the next page.
Signal cable, the side of antenna unit
RF unit
to one of the screws
of the cable clamping plate
9-pin connector:
to J801 on MD-9208
4-pin connector:
to J802 on MD-9208
13-pin connector:
to J611 on IF-9214*
1
or 03P9522*
2
*1: For Antenna unit RSB-0071-057, XN10A-RSB-0070/0073-064 and
XN12A-RSB-0070/0073-059
*2: For Antenna unit RSB-0071-057A, XN10A-RSB-0070/0073-064A and
XN12A-RSB-0070/0073-059A
J802
J801
J611
MD-9208
03P9522
PTU-9335
Cable
entry
J802
J801
J611
MD-9208
IF-9214
PTU-9335
Cable
entry
A
ntenna unit: RSB-0071-057
XN10A-RSB-0070/0073-064
XN12A-RSB-0070/0073-059
Antenna unit: RSB-0071-057A
XN10A-RSB-0070/0073-064A
XN12A-RSB-0070/0073-059A