Furuno 511 Marine Instruments User Manual


 
3. STEERING MODE
3-21
3.6.2 Dodging in AUTO or NAV mode
1. Press the [PORT] or [STBD] key down to change the course until the boat
finishes to avoid the obstruction.
The equipment goes into the DODGE mode and the audible alarm sounds when
one of the above keys is operated, to alert you to dodge operation. Note also
that “DODG” appears on the display.
Note: Press the [PORT] and [STBD] keys together to fix the course setting
value.
DODGE
359.9
RUDDER
DODGE mode
Heading from
heading sensor
Rudder angle (XTE or Deviation)
HDG
M
0
40
20
10
40
20
10
Heading mode
M: Magnetic
T: True
359
Course set
Dodge mode display 2
2. Release the key pressed to return to the previous mode (AUTO or NAV).
You can operate the autopilot with the status before the DODGE mode.
Note: In the AUTO mode, the [PORT] and [STBD] keys can be used to change
the course degree by 5°, 10° or 20° steps depending on the installation
setting. It is useful when you need to affect a large course change rapidly.
However, the DODGE mode becomes inoperative when this function is
activated. For details, ask your serviceman.