Furuno B042-016 SONAR User Manual


 
ii
CAUTION
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Ground the equipment to
prevent mutual interference.
Do not allow warm water or any other
liquid other than seawater or freshwater
to contact the transducer.
Damage to the transducer may result.
Do not install the transducer where
noise or air bubbles is present.
Performance will be affected.
CAUTION
The transducer cable must he handled
carefully, following the guidelines
below.
Keep fuels and oils away from the
cable.
Locate the cable where it will not be
damaged.
The cable sheath is made of chloro-
phrene or polychloride vinyl, which
are easily by damaged plastic solvents
such as toulene. Locate the cable
well away from plastic solvents.
Standard
compass
Steering
compass
CV-1100L
0.7 m 0.5 m